The easiest way to more personal consumption / personal use.
The screw-in heater 3 kW was developed especially for use with the photovoltaic power manager AC • THOR and the screw-in heater 9 kW for use with the photovoltaic power manager AC • THOR 9s. The screw-in heating elements can be installed in fresh water and buffer storage tanks. Their special design results in only very low thermal surface loads on the heating elements, which contributes directly to increasing the service life of the product.
Infinitely variable through the photovoltaic power manager AC • THOR or AC • THOR 9s
The desired hot water temperature can be set with a rotary knob. The AC • THOR or AC • THOR 9s detects the shutdown and automatically goes into standby mode for minimal self-consumption.
A safety temperature limiter in accordance with regulations is of course integrated.
In some projects, however, higher temperatures are desired, for example if a buffer tank is to be loaded to over 90 ° C. The screw-in heater is also available without a thermostat, only with a safety temperature limiter. To end the heating process, the temperature sensor supplied with the AC • THOR and the AC • THOR 9s must be used in any case.
- With manually adjustable target temperature (bimetal thermostat)
- 1.5 inch standard thread
- Single-phase or 3-phase
- Optionally also without thermostat, only with safety temperature limiter
- 1x Screw-in heater 9kW
– Heating power: 0 – 9,000 W when controlled by AC • THOR 9s
– Mains connection: 3-phase, 3×230 V 50Hz
– Degree of protection: IP45
– Dimensions (W x H x D): 88 x 88 x 873 mm