Plug attachment type 2
Intelligent plug attachment for NRGkick for connection to type 2 charging stations, max.32A, 22kW
Scope of delivery and features:
- Plug attachment type 2
- Maximum charging current up to 32 amps – corresponds to maximum charging power of up to 22 kW
- Plug attachment suitable for the patented safety plug system of the NRGkick charging unit
Temperature monitoring & socket overheating protection
All NRGkick plug attachments have temperature monitoring – on every single phase pin. The plug attachment for Schuko sockets has dual temperature monitoring on both pins. This means that your NRGkick knows exactly whether an incorrectly installed socket is causing excessive heat and avoids dangerous situations before they arise. If your socket becomes too hot, NRGkick regulates the charging current completely independently.
Avoidance of arcing through automatic pull-off detection
If a charging unit is disconnected from the power supply during charging, dangerous arcs occur which damage the contacts. The functioning of the NRGkick plug attachments and the patented safety plug system completely rule out the possibility of arcing – as the only charging unit on the market, the current flow is interrupted before the contacts leave each other!
Incorrect connection check
NRGkick detects whether a socket has been incorrectly connected or installed – for example, if a second phase has been connected to a three-phase socket instead of the neutral conductor. This enables the user to use an LED signal on the charging unit and the plug unit to indicate that there is a problem with a socket and prevents charging.
Additional LED display on the connector unit
NRGkick plug attachments are connected to the plug unit of the NRGkick – there is an additional LED display that informs you about the status of your charging unit at all times.
Optimal feel
NRGkick connector attachments snap in noticeably and securely – accidental disconnection is impossible. At the same time, the surface of the connector system, which is equipped with non-slip, soft components, ensures that you can quickly and easily remove and replace the connector attachments if necessary.
Automatic plug attachment recognition for your safety
The plug attachments are recognized and identified fully automatically by NRGkick. This ensures that the charging current does not exceed the maximum value for which the plug attachment is approved. Of course, national regulations are also observed, in which the charging current must not exceed a certain value, for example when charging using a Schuko plug attachment.
Manufacturer warranty
2 years
Manufacturer and article number: NRG0028 / 20001006
Reviews
There are no reviews yet