KEBA pedestal (double) (90.786)

Stainless steel pedestal for mounting two KEBA charging stations.

Notes on installing the pedestal:

• The calculation, design and production of the concrete foundation is the responsibility of the site manufacturer.
• Horizontal, level and stable ground is required for installation. To ensure secure and permanent anchoring, we recommend laying a concrete foundation:

  65 cm (L) x 50 cm (W), depth = min. frost line but > 40 cm, frost-proof foundation. Concrete: C30/37 LP for XC4, XD1, XF4 or C25/30 LP for XC4, XD1, XF2 Reinforcing steel: BSt 500 S; BSt 500 M

• The substrate must allow any water that gets into the plinth to drain away.
• All cables must be led out of the ground exactly in the middle of the concrete foundation and have an excess length of approx. 1.5 m for further installation.
• When constructing the concrete foundation, the cables must be protected against damage by suitable means (e.g. with a protective conduit). The protective conduit must have an excess length of approx. 25 cm above the concrete foundation.
• Installation of the pedestal on asphalt is not permitted!

Manufacturer's warranty: 2 years

Manufacturer part number: 90.786

Item number: KEB0028

KEBA Group AG
Reindlstraße 51
4040 Linz
[email protected]